ACC CM-4 Fluid
CC CM-4 is a volatile polydimethylcyclosiloxane, primarily composed of cyclotetrasiloxane. The product is clear, tasteless, essentially odorless, non[1]greasy and non-stinging. It is base fluid in several personal care products, with excellent spreading and lubrication properties and unique volatility characteristics. Can be used in antiperspirants, deodorants, skin creams, lotions, bath oils, suntan and shaving products, make-up, and nail polishes. Faster drying time in low VOC hair spray formulas. Lifts and removes dirt without leaving any greasy residue or stinging sensation
Acetic Acid Food Grade Kosher
Acetic Acid
This grade of glacial acetic acid meets the requirements of the Food Chemical Codex and is produced under appropriate current good manufacturing practices (cGMP) for use as a food additive. All kosher products produced are manufactured under rabbinical supervision in full accordance with Jewish dietary law.
Acritamer FD 21
ACRYLATES/C10-30 ALKYL ACRYLATE CROSSPOLYMER
Acritamer FD 21 is a hydrophobically modified crosslinked polyacrylate polymer. It can quickly and easily self-wet without any mixing required. It acts as high-efficient & low-dosage thickener and suspending agent, also provides electrolyte tolerance and unique sensory benefits in formulas.
Activemol PC
Propylene Carbonate
ACTIVEMOL PC is a solvent with wetting and moisturizing properties, low toxicity, low evaporation rate and low flammability.
Activemol PC - A
Propylene Carbonate
Solvent with wetting and moisturizing properties, low toxicity, low evaporation rate and low flammability.
Additive MAX ADD
LDPE carrier resin based processing aid masterbatch. It is designed to lower the apparent viscosity of the polymer melt during processing. It provides reduction of melt-fracture phenomenon along with reduction or elimination of die build-up. ADD-MAX® 104 lowers extrusion temperature, improves surface properties and reduces energy consumption as well as surface defects. It improves gauge control but reduces melt-orientation, die-swell and melt-pressure. The potentially higher throughputs can be achieved when capacity is available (10% - 30%). It offers faster color changes along with reduction of waste and less production interruptions. It does not influence end-product mechanical properties, such as tensile strength, impact resistance, and long‐term hoop stress (in pipe applications). Recommended for PP, HDPE and LLDPE cast and blown films. Can also be used in blow molding and general extrusion. It is suitable to be used in pipes, tubes, food packaging as well as wires & cables. A dosing level of 1% is a good starting point, with a possible range between 0.8% and 2.0%.
Adogen 462 75%
Adogen® 462 75% is a dicoco dimethyl ammonium chloride quaternary supplied at 75% actives in IPA. Adogen 462 75% quaternary finds use in a variety of applications such as emulsification of oils, corrosion inhibitor, antistat, mineral slurry dispersant and imparts a cationic nature.
Adogen 570-S
Adogen® 570 S is a fatty-1,3-propylene diamine manufactured from tallow type fatty acids. Adogen 570 S contains both primary and secondary amine groups. The physical characteristics of Adogen 570 S enable it to bond strongly to relatively negatively-charged surfaces such as metals, textiles, plastics and mineral ores. The main functions of this product include corrosion additive, dispersant, emulsifier, epoxy curing agent, gasoline additive and chemical intermediate.
Aloe Vera Gel Dec 10X AG014
Aloe Barbadensis Leaf Juice
Aloe Barbadensis Leaf Juice. Acts as a conditioning agent. It is a decolorized version and mimics mother nature by meeting molecular weight distribution of polysaccharides present in aloe vera leaves. Aloe Vera Gel DEC 10X(AG014) contains potassium sorbate and sodium benzoate as preservatives. It is BSE/TSE-, GMO- and pesticide-free. Aloe Vera Gel DEC 10X(AG014) finds application in formulating hand & body lotions, skin cleansers, facial moisturizers, shampoos & conditioners, styling gels, shaving & depilatory preparations and sun & after-sun care products.
Aloe Vera Gel Dec. 1X AG002
Aloe Barbadensis Leaf Juice
Aloe Vera Gel 1X AG002 is used in skin and hair care products.
Amphoterge K-2
Disodium cocoamphodipropionate
Disodium cocoamphodipropionate is a cleaning agent, or "surfactant," that can also be found in skin soaps, lotions and shampoos. It is made from fatty acids from coconut oil, also called coconut acid. It is used in products to remove dirt by helping water to mix with dirt and oils so they can be rinsed away.
Vegan
Amphoterge KJ 2
Amphoterge KJ-2 is a salt-free capryl substituted imidazoline amphoteric surfactant. This low foaming surfactant can be easily used in a broad number of industrial applications where detergency and compatibility are important. This product comes in two forms: Amphoterge KJ-2, the traditional forty percent solid version, or in the new higher, fifty percent solids version: Amphoterge KJ-2-50.
Halal
Antil 120 Plus MB
PEG-120 Methyl Glucose Dioleate
ANTIL® 120 Plus is a very efficient, sugar-based thickening agent for aqueous surfactant systems. It is suitable for many formulations, e.g. hair shampoo, shower gel, foam bath, liquid soap or hand wash paste.
RSPO
Antil 500 Pellets
PEG-200 Glyceryl Stearate
ANTIL® 500 Pellets enables a significant reduction of the active surfactant level in standard cleansing formulations. In addition, the extraordinary efficiency and high flexibility of ANTIL® 500 Pellets facilitate the thickening of challenging surfactant systems, such as sulfate-free formulas, effectively supporting the trend for milder cleansing in personal care. The 100% active, preservative-free solid is clearly soluble in water and processable at room temperature.
AO001 Aloe Vera Oil Extract Cosmetic Grade
Mineral Oil, Cocos Nucifera (Coconut) Oil, Aloe Barbadensis Leaf Extract
Cosmetic Grade Aloe Vera Oil Extract - Including Mineral Oil, Cocus Nucifera (Coconut) Oil and Aloe Barbadensis Leaf Extract.
APG1214E
APG1214E is a non-ionic surfactant made by SpecChem Industry. It acts like a soap to improve cleaning and reduce surface tension in skincare products, shampoos, and cleaning lotions. It's gentle on skin and easily biodegradable. Refer to SpecChem's safety data sheet for safe handling.
Aquanate LSR 30
An easy-to-use, high flash foaming co-surfactant for boosting flash foam speed at low levels of incorporation. Aquanate™ LSR 30 is used to help stabilize the foam and improve its quality. It is compatible with cationic, anionic & amphoteric surfactants.
Aquanate SCI 85P
Aquanate SCI-85P is an anionic surfactant in powder form. Sodium Cocoyl Isethionate produces a dense lather that contributes to the overall foam stability of finished formulations. It is high foaming in both hard and soft water. Optimum pH range is 6 to 8, however the pH can be slightly higher for some solid formulations such as soap-based detergent bars. Usage levels range from 1-5% w/w in liquid formulations to 2-60% w/w in solid formats.
Asco Las-96
Dodecylbenzene Sulfonic Acid
ASCO® 96 is the anion surfactant that is obtained by direct sulfonation of Linear Alkyl Benzene of C10~C13 chain lengths. It can exhibit the outstanding cleansing power, foaming ability and also show a very stable properties in the acid, alkali and hard water.